Construction Castings in Kolkata: Heavy-Duty Cast Iron & SG Iron Components for Infrastructure Projects
Kolkata’s construction environment is demanding—traffic load, constant excavation work, waterlogging during monsoon, and long-term expo…
Explore authoritative engineering guides, metallurgy specifications, EN124 casting standards, and export-grade casting technology from ISO 9001 certified foundry specialists.
Kolkata’s construction environment is demanding—traffic load, constant excavation work, waterlogging during monsoon, and long-term expo…
Agriculture depends on equipment that can take rough usage—soil impact, vibration, moisture, and heavy mechanical load. That’s why agri…
Kolkata’s water distribution and utility pipelines run under roads, footpaths, and industrial zones—so valves need secure protection an…
In Kolkata’s dense urban infrastructure—where water lines, valves, meters, telecom ducts, and utility connections run below roads and f…
Kolkata’s drainage system takes a real beating—intense monsoon downpours, silt and debris, and continuous vehicle movement on busy road…
Kolkata’s heavy monsoon rainfall and high surface runoff make stormwater management a real challenge for roads, residential complexes,…
In a city like Kolkata—where roads face heavy traffic, frequent maintenance access, and intense monsoon conditions—recessed type manhol…
Kolkata’s drainage and utility networks sit under constant pressure—heavy traffic loads, monsoon waterlogging, corrosion, and frequent…
Counter weights are engineered components used to balance loads, improve stability, and control motion in machines, structures, and lif…
Aris Foundry delivers high-integrity Grey Cast Iron and Ductile SG Iron castings engineered to international ASTM, BS EN, DIN, and IS standards for global infrastructure.
Heavy-duty EN124 D400 manhole covers, C250 kerb drain units, and gully gratings engineered for highway municipal drainage networks.
High-pressure ductile iron pipe fittings, flanged bends, equal tees, dismantling joints, and sluice valve boxes manufactured to ISO 2531.
Safety-critical railway track castings, cast iron brake blocks, rail chairs, slide baseplates, and locomotive ballast counterweights.
High-wear agricultural machinery castings, tractor axle housings, CNC machined wheel hubs, and plow points built for farm equipment OEMs.
A side-by-side engineering comparison of standard Grey Cast Iron versus Spheroidal Graphite (SG) Ductile Iron poured at our Baidyabati Works.
| Mechanical Property | Grey Cast Iron (EN-GJL-250 / FG 260) | Ductile SG Iron (EN-GJS-500-7 / 500/7) | Ductile SG Iron (EN-GJS-400-18 / 400/18) |
|---|---|---|---|
| Tensile Strength (MPa) | 250 MPa min | 500 MPa min | 400 MPa min |
| Yield Strength 0.2% (MPa) | — (Brittle Mode) | 320 MPa min | 250 MPa min |
| Elongation % ($A$) | 0.3% – 0.8% | 7.0% min | 18.0% min |
| Impact Energy (Charpy V) | Low (< 2 J) | 12 Joules | 18 Joules (-20°C Low Temp) |
| Brinell Hardness (HBW) | 180 – 240 HB | 170 – 230 HB | 130 – 180 HB |
| Primary Applications | Machine beds, counterweights, drainage gratings | EN124 D400 covers, gearbox housings, axle supports | High-pressure water pipe fittings, valve bodies |
Authoritative technical answers from Aris Foundry engineering specialists regarding casting metallurgy, EN124 compliance, tolerances, and custom OEM manufacturing.
Grey cast iron contains sharp flake graphite, offering excellent acoustic damping, high thermal conductivity, and machinability, but very low elongation (<1%).
Ductile iron is inoculated with magnesium causing graphite to precipitate as spherical nodules. This eliminates internal stress risers, yielding tensile strength up to 700 MPa and elongation up to 18% matching cast carbon steel.
We manufacture municipal castings across all EN 124 classes: A15 (1.5 tonne pedestrian), B125 (12.5 tonne car parks), C250 (25 tonne kerbside channels), D400 (40 tonne heavy carriageways), E600 (60 tonne docks/industrial), and F900 (90 tonne airport runways).
Every furnace heat is verified by 24-channel optical emission spectrometry (OES). We perform Universal Testing Machine (UTM) tensile/elongation tests, Brinell hardness checks, magnetic particle inspection (MPI), ultrasonic testing, and hydrostatic pressure testing up to 25 bar.
Yes. We regularly manufacture according to ASTM A48 / A536, BS EN 1561 / 1563, ISO 1083 / 2531 / 9523, DIN 1691 / 1693, and IS 210 / 1865 specifications for international buyers.
Custom pattern tooling and first-article prototype development take 2 to 3 weeks depending on part complexity. Full containerized batch production and export shipping take 3 to 5 weeks from sample sign-off.
Yes. Our in-house machine shop operates CNC turning centers, vertical machining centers (VMC), and boring mills. Coatings include anti-corrosive bitumen dip, epoxy coating (FBE), zinc primer, and hot-dip galvanizing exceeding 250 microns.
We export to Europe, the Middle East, North America, and Southeast Asia. Castings are packed on ISPM-15 certified heat-treated wooden pallets, steel-strapped, shrink-wrapped, and stuffed with Indian Customs Self-Sealing certification at Baidyabati Works.
Submit 2D drawings (PDF/DWG) or 3D STEP models via our RFQ modal dialog, email info@arisfoundry.com, or message WhatsApp (+91 98744 82288). Detailed technical quotes are returned within 24 hours.
Connect directly with our metallurgy engineers and production estimators to receive comprehensive technical quotes, dimensional tolerances, and containerized export schedules.